Dream Property DM8000 HD PVR - Manual (Page 59)

-59-
12. Service searching
12.1 DVB-S/DVB-S2 Tuner configuration
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option “Setup” and press the OK-Button to select.
1. Navigate to the option “Service searching” and press the OK-Button.
• The “Service searching” menu will open up.
2. Navigate to the option “Tuner configuration” and press the OK-Button.
• The “Choose tuner“ menu will open up.
3. Use the Navigation-Buttons up and down to select the DVB-S/DVB-S2 tuner and press the OK-Button.
12.1.1 Single satellite – direct connection (DVB-S/DVB-S2)
Use this type of configuration if you want to receive a single satellite with a Single Universal LNB. The coax
cable is directly connected from you Dreambox to the LNB. Please read the section 12.1 DVB-S/DVB-S2 con-
figuration to learn how to get into this menu.
The “Reception settings” menu will open up.
Use the up/down-Buttons to navigate to the “Mode” option and use
the left/right-Buttons to select “Single”.
11.9 Factory reset
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option “Setup” and press the OK-Button to select.
1. Navigate to the option “Factory reset” and press the OK-Button.
You are asked if you really want to reset all you settiongs to the
factory defaults.
If you choose “yes“ all you configuration data inclusing bouquets,
sattelite data, etc. will be lost.
Your Dreambox will automatically reboot afterwards.