DaySequerra M4FM - Manual (Page 6)

6
M4FM User Manual
M4FM Key Features
• Bright LCD front panel display of Station, presets, RBDS with network and alarm conditions
• Frequency-Agile RF Input – Synthesized FM preselector provides -50 dB quieting
sensitivity < 30 dBf (-90 dBm)
• Built-in RF Attenuator – 30 dB for wide RF input range of <0.5 vRMS to 7 vRMS
• Worldwide Capable – Complete with user-selectable 100 or 200 kHz tuning steps and 50 or
75 µSec de-emphasis
• Simultaneous Modulation Measurements – Total, pilot, L, R, L+R and L-R, and all
Composite-SCA level measurements with better than 1.0% accuracy
• Superb Audio Performance – +4 dBm @ 100% modulation with SNR > 75 dB and THD <
0.1%; full-time AES-3 digital audio output as well as a high-performance headphone output with
greater than 1W into 8-ohm
• Email Alerts and Rear Panel Alarm Tallies – For loss of Audio, Carrier and RDS/RBDS;
remote reset via rear panel GPI
• Remote Dashboard providing total remote control, display and remote reset from any browser
including
• 50 presets with RBDS, network and alarm conditions
• Audio level, digital audio quality and carrier quality indications
• Complete remote firmware upgrade – tolerant of high-latency networks
• FRONT PANEL ALARM LED – Indicates active alarm condition
• PROGRAMMABLE STATUS ALARMS – alarm outputs for loss of audio program, carrier, pilot
and RBDS as well as audio peak, all with programmable settings for level and duration
• High performance Headphone Monitor delivering greater than 1W into 8-ohm
• Webserver compatible with any browser on your Ethernet network
• Alarms can be emailed to your phone
• Remote reset via WebServer
• Use your Wireless Router for remote control using your Android® or iPhone®