DaySequerra M4FM - Manual (Page 17)

17
M4FM User Manual
Region
Figure 13.
M4FM supports 100 KHz or 200 KHz tune spacing for US and Euro. (Illustrated in figure 13.) The
factory default is set to US, 200 KHz. Press ENTER after making a selection to save and EXIT to the
previous menu
RF Loss Pad
-30 dB of attenuation is applied during startup by default unless this feature is
disabled. Remotely this feature is available with the ‘Other Settings’ box in the System Menu of the
webserver.
Enable or Disable. (Default: Enabled) Select to exit to the previous menu.
Diagnostics
A Read-Only menu displaying the SNR (Signal to Noise Ratio) in dB. The Date with a running 12-hour
AM/PM clock. Toggle Exit with the arrow and press ENTER to exit to the previous menu.
Figure 14.
Network
A Read-Only menu that displays the current status of DHCP, the static IP address, Subnet, Gateway
and MAC address. Toggle Exit with the arrow and press ENTER to exit to the previous menu. More
NETWORK details can be viewed