Austin Hughes X-800 Smartcard Handle - Manual (Page 81)

www.austin-hughes.com UM-X-ISM-Q414V3 P.76
( I ). Accessing MIB Files
Use the World Wide Web (WWW) to download the SNMP MIB fi le at this URL:
http://www.austin-hughes.com/support/utilities/infrasolutionX/X-ISM-MIB.mib
( II ). Enabling SNMP Support
The following procedure summarizes how to enable the InfraBox for SNMP support.
1 . Connect the InfraBox to a computer.
2 . Open the Internet Explorer ( I.E. ) version 8.0 or above
3 . Enter the confi gured IP address of InfraBox into the I.E. address bar.
Default IP address is “ 192.168.0.20 “
4 . Enter “ Login name “ & “ Password “.
Default login name & password are “ 00000000 “
5 . Select SNMP from the left navigation pane
6 . The SNMP Settings window appears as below:
< 13.1 > SNMP
7 . Click “ Enable “ in “ SNMP Agent “ to start the SNMP agent service
8 . Input “ Read Community “. Default is “ public ”
9 . Input “ Write Community “. Default is “ private ”
10 . Select “ disabled “ or “ V2Trap “ in “ SNMP Traps “
If select “ V2Trap “ , please input IP address of the SNMP management station in “ Station IP: “
11 . Click “ Apply “ to fi nish the SNMP settings