7 > remote access – Austin Hughes X-800 Smartcard Handle User Manual
Page 49
www.austin-hughes.com
UM-X-ISM-Q414V3
P.44
< 9.7 > Remote Access
After software installation, administrator can turn on fi rewall of the management PC and set the inbound &
outbound rules of fi rewall.
Inbound rules :
1.
Open “ Control Panel “
2.
Select “ Windows Firewall “
3.
Select “ Advanced settings “
4.
Right Click “ Inbound Rules “ & select “ New Rules… “
5.
Select “ Port “ & Click “ Next> “
6.
Select “ TCP “ then input “ 80, 4000, 5432, 18081 “ in “ Specifi c local ports: “
7.
Select “ Allow the connection “ & Click “ Next> “
8.
Tick all three options & Click “ Next> “
9.
Input the “ Name “ & “ Description “ of the port & Click “ Finish “
Outbound rules :
1.
Open “ Control Panel “
2.
Select “ Windows Firewall “
3.
Select “ Advanced settings “
4.
Right Click “ Outbound Rules “ & select “ New Rules… “
5.
Select “ Port “ & Click “ Next> “
6.
Select “ TCP “ then input “ 4001, 4003, 4006, outgoing SMTP port “ in “ Specifi c remote ports: “
7.
Select “ Allow the connection “ & Click “ Next> “
8.
Tick all three options & Click “ Next> “
9.
Input the “ Name “ & “ Description “ of the port & Click “ Finish “
The port no. of outgoing SMTP port depends on the mail server setting in < 11.2 >