Austin Hughes X-800 Smartcard Handle - Manual (Page 16)

www.austin-hughes.com UM-X-ISM-Q414V3 P.11
Installation for ( rod control system )
2 - point Lock
< 2.3 > Handle
X-800P / X-800M
Handle mounting screw set for 2-Point Lock ( with rod control )
Rod control
system
Cabinet
door
>>>>>
>>>>>
Orignal
handle screws
>>>
>>>
1. Mount the smartcard handle to the universal mounting position.
2. Attach the Rod control system to the handle and insert the M5 x 10mm screw x 1 with circle hole
washer to secure the position.
3. Insert Orignal handle screws x 2 through the Rod control system and door to the handle to fi x it in place.
4. Place the U bracket with M3 x 10mm screw x 2 to further secure the handle in place.
4
4
5
6
Qty. 2-Point Lock
( with rod control )
Handle mounting bracket 2
M4 x 9mm screw for 4
Square hole washer 6
Circle hole washer w/ M5 x 10mm screw 2
U bracket 2
M3 x 10mm screw for 4
2
3
4
1
1
5
6
5
5 6
While insert the screws to secure
the handle with electronic screw-
driver
, please set the torque NOT
exceed 8 kgf/cm