AMT Datasouth M5DT Plus User Manual
Page 27
25
Self-test
Printer will print the printer configuration after
gap/black mark sensor calibration. Self-test
printout can be used to check if there is any dot damage on the heater element, printer
configurations and available memory space.
Self-test printout
Print head check pattern
Model name and F/W version
Printed mileage (meter)
Firmware checksum
Serial port configuration
Code page
Country code
Print speed (inch/sec)
Print darkness
Label size (inch)
Gap distance (inch)
Gap/black mark sensor sensitivity
Numbers of download files
Total & available memory space
Note:
1. The physical flash memory for RoHS compliant version is 2MB Flash and 2MB
DRAM (M5 DT Model) / 8MB SDRAM (M5 DT PLUS Model)
2. System occupies 960 KB in Flash memory so total flash memory space for user
downloading is 1088 KB
3. System occupies 1792 KB in DRAM so total DRAM memory space for user
downloading is 256 KB (M5 DT Model)
System occupies 7936 KB in SDRAM so total SDRAM memory space for user
downloading is 256 KB (M5 DT PLUS Model)