AMT Datasouth M5DT Plus User Manual

Page 23

3.9.2 Printer Function (Calibrate, Ethernet setup, RTC setup…)

1. Select the PC interface connected with bar code printer.

2. Click the “Function” button to setting.

3. The detail functions in the Printer Function Group are listed as below.

Function

Description

Factory Default

Initialize the printer and restore the settings to
factory default.

Dump Text

To activate the printer dump mode.

Configuration Page

Print printer configuration.

RTC Setup

Synchronize printer Real Time Clock with PC.

Calibrate Sensor

Calibrate the sensor specified in the Printer Setup
group media sensor field.

Reset Printer

Reboot the printer.

Print Test Page

Print a test page.

Ignore AUTO.BAS

Ignore the downloaded AUTO.BAS program.

Ethernet Setup

Setup the IP address, subnet mask, gateway for
the on board Ethernet.

Note:

For more information about Diagnostic Tool, please refer to the diagnostic utility quick start

guide in the CD disk \ Utilities directory.

3.10. Install Memory Card

1. Turn the printer over.

2. Remove 1 screw and open the memory card cover.

Memory Card Cover