AMT Datasouth Fastmark 600 - Manual (Page 89)

Fastmark 600 Series User's Guide 89
Boot Mode Feature and Value List
The Boot Mode has several programmable features that are used during firmware updates. Click the Display
Up/Down buttons to access the Boot mode features.
FEATURE NAME VALUE RANGE DESCRIPTION
Download New F/W N/A Click the Enter button to start download mode. The
display will change to:
Download New F/W
Waiting For Data /
The printer will wait on a firmware update file on the
Parallel ports. The FlashWiz Lite section of the Feature-
Man program is used to download firmware files.
Reboot System N/A To exit boot mode and return to normal PAL
TM
firmware
mode, click the Enter button. After a firmware update is
complete, this feature is automatically selected and allows
the printer to be rebooted with the newly loaded firmware.
Interface Select Identical to feature in standard setup mode.
COM1: Baud Rate Defaults to 57K baud when in boot mode. Change to
match host if needed.
COM1: Parity Change to match host if needed.
COM1: Data Bits Change to match host if needed.
COM1: Handshake Change to match host if needed.
Firmware Rev. Displays revision of boot code currently loaded. The boot
code can only be updated by changing Flash chips located
on main board.