AMT Datasouth Fastmark 600 - Manual (Page 19)

Fastmark 600 Series User's Guide 19
Loading the Ribbon
Thermal Transfer Media only
If Direct Thermal Media is used, skip to the section Loading Media.
1. Open the Top Media Access Cover by pressing in on both Cover locks (one on each side
of the printer) and lifting the top cover until it rests in the vertical position.
Figure 9 – Top Media Cover Latches
2. Press down on the two Print Head Latches to unlock the print head module .
Figure 10 – Print Head Latches
Cover Lock
Print Head Module
Print Head Release Latch
Print Head Release Latch