American Energy Systems MagnuM T40 - Manual (Page 12)

12
OUTSIDE AIR DIAGRAM
7/16” bolt to the steel chassis
(only on mobile home installation)
Outside air hookup is located on the
back panel of the pedestal fan
housing.
WARNING: DO NOT RESTRICT
OR OTHERWISE COVER THE
FAN INTAKE EXCEPT AS
SHOWN FOR THE OUTSIDE AIR
HOOKUP.
The outside air must be directly
connected to the appliance. Outside
air may be taken from a vented crawl
space. Outside air cannot be taken
from an attic, garage or any other
enclosed space within the building.
Note: The outside air tube will only
cover a portion of the fan intake. Air
will be drawn from outside and inside
the home.
Connect a flexible hose to the outside
air adaptor plate and route the hose as
directed in the diagram.