Vertical installation – American Energy Systems MagnuM Baby Countryside User Manual
Page 16
16
VERTICAL INSTALLATION
GUIDELINES ON CONNECTING TO AN EXISTING FACTORY-BUILT CHIMNEY:
1.
Inspect the chimney for the presence of creosote, soot or other combustible deposits, and blockage or
obstructions. Thoroughly clean the chimney and remove any obstructions.
2.
Thoroughly inspect the chimney for soundness, proper clearances and presence of all necessary parts, including a
chimney cap, prior to making the connection.
3.
This stove may be connected to an existing ceiling-mounted factory-built chimney with a diameter of 4, 6, or 8
inches.
4.
Use a 3-4”, 3-6” or 3-8” Pellet Vent to Chimney Adapter provided by the pellet vent manufacturer.
5.
Use only listed 3 inch Type PL pellet vent pipe between the stove and the chimney.
6.
Follow the pellet vent manufacturer’s instructions to assemble the vent pipe and make the connection to the
chimney.
Storm Collar
- MagnuM Countryside (44 pages)
- MagnuM Countryside (39 pages)
- MF3513S Fuel Stirrer (2 pages)
- MF3514 Fuel Stirrer Drive Shaft (1 page)
- MF3522 Door (2 pages)
- MF3540 Fuel Stirrer Motor (2 pages)
- MF3542 Exhaust Blower (3 pages)
- MF3553 Auger Inspection (1 page)
- MF3573 Auger Motor (2 pages)
- MF3650 Exhaust Blower (3 pages)
- P7554 Brick Board (1 page)
- BC2077 Door (3 pages)
- BC2500 Auto Ignition System (2 pages)
- BC3525 Grill (1 page)
- BC3555 Grill (1 page)
- BC7000 Auger Housing (9 pages)
- MF3626 Door Handle (3 pages)
- MF3642 DC Fan Blade - Exhaust Blower (2 pages)
- RP2062 DC Wire Harness (2 pages)
- RP2063 AC Wire Harness (2 pages)
- RT080 (2 pages)
- MagnuM Baby Countryside (43 pages)
- MagnuM Winchester (52 pages)
- MagnuM Winchester (49 pages)
- MagnuM Winchester (51 pages)
- CF25 Room Fan Blower (2 pages)
- P6115 Wire Harness (2 pages)
- MagnuM 6500 (44 pages)
- MagnuM 6500 (45 pages)
- MagnuM 7500 (43 pages)
- MagnuM T40 (50 pages)
- MagnuM T40 (19 pages)
- MagnuM T40 (32 pages)
- MagnuM T40 (31 pages)
- MagnuM ZC (5 pages)
- CF-2200 Door (1 page)
- NPS-1005-N-7 Control Panel (11 pages)
- PP-1030-LR Wire Harness (3 pages)
- PP-1502 Auger Weldment (2 pages)
- Country Flame Little Rascal (35 pages)
- Country Flame Little Rascal (37 pages)
- Harvester (44 pages)
- Harvester (57 pages)
- Crossfire Flex (58 pages)