ADLINK Express-IBR - Manual (Page 49)

Chapter 4 BIOS Setup
Express-IBR Reference Manual 43
• Fan2 Smart Fan Mode [Manual Mode; Auto Mode (Module); Auto Mode (ADT 7490); Auto
Mode (CPU)]
• Fan2 expect PWM Output/DC Voltage [255]
 Module temperature : +XX C
 ADT7490 temperature : +XX C
 CPU temperature (By PECI) : +XX C
 Module Fan1 Speed (In Module) : N/A
 Module Fan2 Speed: (In Carrier) : N/A
 Vtt : +X.XXX V
 Vccp : +X.XXX V
 Vcc : +X.XXX V
 +5V : +X.XXX V
 +12V : +XX.XXX V
• W83627DHG Super IO Configuration
 Serial Port 1 Configuration
• Serial Port [Disabled; Enabled]
• Device Settings IO=3F8h; IRQ=4
• Change Settings [Auto
IO=3F8h; IRQ=4
IO=3F8h; IRQ=3,4,5,6,7,10,11,12
IO=2F8h; IRQ=3,4,5,6,7,10,11,12
IO=3E8h; IRQ=3,4,5,6,7,10,11,12
IO=2E8h; IRQ=3,4,5,6,7,10,11,12]
 Serial Port 2 Configuration
• Serial Port [Disabled; Enabled]
• Device Settings IO=2F8h; IRQ=3
• Change Settings [Auto
IO=2F8h; IRQ=3
IO=3F8h; IRQ=3,4,5,6,7,10,11,12
IO=2F8h; IRQ=3,4,5,6,7,10,11,12
IO=3E8h; IRQ=3,4,5,6,7,10,11,12
IO=2E8h; IRQ=3,4,5,6,7,10,11,12]
• Device Mode [Standard Serial Port Mode
IrDA Active pulse 1.6 uS
IrDA Active pulse 3/16 bit time
ASK-IR Inverting IRTX, Routed to IRRX
ASK-IR Inverting IRTX 500KHz, Routed to IRRX
ASK-IR Inverting IRTX, Demodulation to IRRX
ASK-IR Inverting IRTX 500KHz, Demodulation to IRRX