ADLINK PCI-9846 - Manual (Page 29)

Getting Started 19
2 Getting Started
This chapter describes the proper installation environment, instal-
lation procedures, its package contents and basic information user
should be aware of.
NOTE: Diagrams and images of equipment mentioned are used
for reference only. Actual system configuration and specs
may vary.
2.1 Installation Environment
Whenever unpacking and preparing to install any equipment
described in this manual, please refer to the Important Safety
Instructions chapter of this manual.
Only install equipment in well lit areas on flat, sturdy surfaces with
access to basic tools such as flat and cross head screwdrivers,
preferably with magnetic heads as screws and standoffs are small
and easily misplaced.
Recommended Installation Tools

Philips (cross-head_ screwdriver

Flat-head screwdriver

Anti-static wrist strap

Anti-static mat
The PCI/PXI-9816/26/46 contain several electro-static sensitive
components that can be easily be damaged by static electricity.
The equipment should be handled on a grounded anti-static mat
and the operator should wear an anti-static wristband during the
unpacking and installation procedure.
Please also inspect the components for apparent damage.
Improper shipping and handling may cause damage to the compo-
nents. Be sure this is no shipping and handling damage on the
components before continuing.
CAUTION The equipment must be protected from static discharge
and physical shock. Never remove any of the socketed
parts except at a static-free workstation. Use the anti-
static bag shipped with the product to handle the equip-
ment and wear a grounded wrist strap when servicing.