ADLINK PXI-2208 - Manual (Page 27)

Installation 15
2 Installation
This chapter describes how to install the DAQ-/DAQe-/PXI-2204/
2205/2206/2208 card. The contents of the package and unpacking
information that you should be aware of are outlined first.
The DAQ-/DAQe-/PXI-2204/2205/2206/2208 card performs an
automatic configuration of the IRQ and port address. You can use
the PCI_SCAN software utility to read the system configuration.
2.1 Contents of Package
In addition to this User's Manual, the package includes the follow-
ing items:
X
DAQ-/DAQe-/PXI-2016/2010/2006/2005 multi-function data
acquisition card
X ADLINK All-in-one CD
X
Software Installation Guide
If any of these items are missing or damaged, contact the dealer
from whom you purchased the product. Save the shipping materi-
als and carton in case you want to ship or store the product in the
future.
2.2 Unpacking
Your DAQ-/DAQe-/PXI-2204/2205/2206/2208 card contains elec-
tro-static sensitive components that can be easily be damaged by
static electricity.
Therefore, the card should be handled on a grounded anti-static
mat. The operator should be wearing an anti-static wristband,
grounded at the same point as the anti-static mat.
Inspect the card package for obvious damages. Shipping and han-
dling may cause damage to the card. Be sure there are no ship-
ping and handling damages on the modules carton before
continuing.
After opening the card module carton, extract the system module
and place it only on a grounded anti-static surface with component
side up.