ADLINK PXI-2208 - Manual (Page 14)

2 Introduction
1.1 Features
The DAQ-/DAQe-/PXI-2204/2205/2206/2208 advanced data
acquisition card has the following features:
X
32-bit PCI bus (DAQ/PXI models) or PCI Express (DAQe
model), plug and play
X
Up to 96 single-ended inputs or 48 differential inputs sup-
porting combinations of SE and DI analog input signals
X
Up to 1024 words analog input Channel Gain Queue config-
uration size
X Analog input resolution and sampling rate:
Z
DAQ-/DAQe-/PXI-2204/2208: 12-bit and up to 3 MHz
Z
DAQ-/DAQe-/PXI-2205: 16-bit and up to 500 KHz
Z
DAQ-/DAQe-/PXI-2206: 16-bit and up to 250 KHz
X
Programmable bipolar/unipolar analog input
X
Programmable gain:
Z
DAQ-/DAQe-/PXI-2204/2208: x1, x2, x4, x5, x8, x10,
x20, x40, x50, x200
Z DAQ-/DAQe-/PXI-2205/2206: x1, x2, x4, x8
X A/D FIFO size: 1024 samples
X Versatile trigger sources: software trigger, external digital
trigger, analog trigger and trigger from System Synchroniza-
tion Interface (SSI)
X
A/D data transfer: software polling and bus-mastering DMA
with scatter/gather functionality
X Four A/D trigger modes including post-trigger, delay-trigger,
pre-trigger and middle-trigger
X
Two-channel D/A outputs with waveform generation capa-
bility (except DAQ-/DAQe-/PXI-2208)
X
1024 word length output data FIFO for D/A channels
X
D/A data transfer: Software update and bus-mastering DMA
with scatter/gather functionality
X Support System Synchronization Interface (SSI)
X Full A/D and D/A auto-calibration
X
Jumper-free and software-configurable