Denon DN-V1700 - Manual (Page 20)

ENGLISH
20
12 PLAYBACK USING THE MAIN UNIT CONTROLS
The following describes how to set playback manually using the controls on the DN-V1700.
Before doing this, prepare a recorded medium on which contents are recorded as described in the section “4 Playback Medium
Contents”.
2 Playing
Connect the DN-V1700’s video output to an external monitor and turn on the power.
1
In the stop mode, press the OSD/TIME SET button.
OSD/
TIME SET
2
“OSD ON” appears on the external monitor.
OSD ON
Insert the recorded medium in the slot (drive).
The ACCESS lamp turns on. Wait until it turns off.
3
Press the SELECT button.
The display switches in the following order: “VIDEO”, “AUDIO”, “PICTURE”,
“SCRIPT”.
Display the directory containing the file you want to play.
SELECT
4
5
Press the PLAY/PAUSE button. Playback starts.
✽ If there is no file to be played, “!” appears and the set remains in the stop
mode.
PLAY / PAUSE
✽ Playback can be started without pressing the OSD/TIME SET button, but in this case the directory display in step 4 is not displayed,
so count the number of times you press the SELECT button so you know which directory is selected.