Directed Electronics VIPER 5701 - Manual (Page 41)

© 2008 Directed Electronics—all rights reserved
Disarming
Extra chirps heard when disarming the system are the Tamper Alert.
If four chirps are heard when disarming the system, then the security
system was triggered in your absence.
If five chirps are heard when disarming the system, the system was
triggered so many times that the Nuisance Protection® Circuitry has
bypassed the intended zone. In either case, the status LED will indi-
cate which zone was involved (see Table of Zones).
The security system will retain this information in its memory, and
chirp four or five times each time it is disarmed, until the next time
that the ignition is turned on.
System status chirps
The siren will chirp when arming/disarming the system. The pattern of
chirps will audibly report the system’s status as described below.
Action Number of Chirps Description
Arm
1 System armed
Arm 1 (3-second delay) System armed with bypass notification
Disarm 2 System armed
Disarm 4 System disarmed with Tamper Alert
Disarm 5 System disarmed