Using the remote start, Before using your remote start, Remote starting your vehicle – Directed Electronics VIPER 5701 User Manual

Page 33

Switch has been programmed to a new number of presses by your

authorized dealer, that number should be indicated below.

Add here:

Override Switch Number ___________

Using the remote start

Before using your Remote Start

Read this user guide, including the warnings on page 24 .

Ensure that the vehicle is parked in the open air and not in a garage.

To use your remote start to pre-warm or pre-cool your vehicle, remem-

ber to set the climate controls to the desired settings before shutting

off the engine.

Remote starting your vehicle

Press the

button on the remote control. The vehicle parking

lights flash.

On the 2-way remote, the Remote Start indicator blinks and ascend-
ing
Remote Start tone plays.

The preset remote start run time is 12 minutes. This can be changed to

between 12 and 60 minutes (see your authorized dealer for program-

ming changes).

Your system has a feature (if programmed on) that will automatically

notify you when the run time is running low. When 9 minutes (of the

12 minute default) runtime has elapsed, the system sends the 2-way

remote control a paging signal. The 2-way remote beep once, plays

▀