Directed Electronics VIPER 5701 User Manual

Page 15

Feature

Command

Confirmation

Feedback

Notes

Armed

(Silent
Trigger

mode)

Press four-
times and then .

Lock LED on, 1
beep & 4 error
tone

Arms the system; sensor and
hardwire Full Triggers will ONLY
page the remote and will not
activate the siren/lights. For
more details see Silent Mode 2
section on page 25.

Rear

Defogger

Press four
times, and then

. (Only after

remote start is
on.)

Remote start
LED ON, 1
beep.

Automatically turns on during
remote start.

Last Trigger

Press four-
times and then
hold for 1.5
seconds.

Replays the
last trigger
message
received.

Trigger refers to the remote
tones and LED pattern gener-
ated by the last alarm trigger
event.

Out of Range Notification

If a command is issued from the remote, but the remote is beyond the

range of the vehicle to receive the command, the remote will respond

with an Out of Range notification. If this occurs, the remote will Blink

rapidly the transmit indicator, turn on the F indicator and play the

error tone.

Since conditions will vary in different areas (ie: Weather, RF interfer-

ence, etc) range may be affected and require you to be closer to the

vehicle for successful transmission.