Directed Electronics VIPER 5701 User Manual

Page 12

Feature

Command

Confirmation

Feedback

Notes

Silent Arm

Press one- time
and then press .

Arm/Lock LED
on, no audio

Arms the system without
chirps

Silent Disarm

Press one- time
and then press

3
4
5
6

A U

Disarm/Lock
LED on, no
audio

Disarms the system without
chirps

Runtime

reset

Press one-time
and then

Remote start
ON tones.

Re-starts the remote start
runtime counter if remote start
is active.

Note: If remote

start is not active, the 2-WAY
remote will respond with error
tone.

Aux 1

Press one time
and then press

A U

The AUX LED
comes on
for 3 seconds,
and AUX
activation tone
sounds.

This is an optional
feature. See your sales rep/in-
staller for details.

Cabin

temperature

Press one time,
then

Hold for 1.5

seconds.

Multiple LEDs
blink, and 1
beep

Cabin temperature is displayed
on the remote. LED lights
up to indicate a range. (See
page 30.)

Sensor

Bypass

Press two-
times and then .

Arm/Lock LED
on, 1 beep

Available when armed only:
bypasses warn triggers. Send
again to bypass Warn & Full
Trigger; Send again to turn
bypass off and monitor sensors
normally. For more informa-
tion, see Modified Arming
Modes on page 24