Preparation before playing disc, Operation for dvd features, Operation – Xoro HSD 4000 User Manual
Page 101
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
Preparation before playing disc
The option of display language catalog Is preset to German. Please refer to Setup operation
Most of functions are operated by remote control. Either operation of remote control and front panel Is
effected when their buttons Indicate the same function
Preparation
•
Turn the TV on and select AV as the TV input
•
Switch on the stereo system power If the player has been connected to stereo system.
Operation for DVD features
This p layer will enter DVD working status after power on.
Pressing
CARD/DVD
button on the remote control can switch from Card reader status to DVD playing
status.
PLAY
•
ConnectAC power cord toAC outlet (AC230V, 50Hz)
•
Switch on the power, the displayed HELLO on the VFD Indicates the normal power supply, then
the VFD changes to LOAD. (Note: The disc Information appears after several seconds If there Is a
disc after LOAD displayed otherwise appears NO DISC)
•
Press
OPEN/CLOSE
button to open disc tray. OPEN will be indicated on the right upper of TV
screen
•
Place a disc (8cm or 12cm) onto the tray. (For onesided disc, position It with printed title side facing
up. Fortwo-sided disc, position side to be playback facing down)
•
Press
OPEN/CLOSE
again to close disc tray.
•
Press
PLAY
to playback disc. You may operate according to
MENU
Indication after
MENU
shows
on screen then press
ENTER
button to playback. Some discs can play automatically after loaded.
•
Switch off the power via pushing the power button again, BYE will be displayed on VFD before
shutdown.
STOP
Press
STOP
button to stop playing. When playback is stopped, the unit records the point where
STOP
was pressed (RESUME function). Press
PLAY
again, and play will resume from this point.
Press
STOP
button twice, RESUME function will be cancelled.
RESUME function is suitable for discs showing playing time during playback.
Note:
•
Some discs including MPEG4 discs have no such function.
POWER
When you press the buttons, the player will switch to Standby status. When pressed again, the
player is returned to normal working status.
Note:
•
should you not wish to use the player, please switch off the power by pressing the power button.
SKIP-/SKIP+
Press
SKIP- /SKIP+
button on remote control during playback. A chapter (DVD) or a track (CD) Is
skipped back or ahead correspondingly each time the button Is pressed.