3 ribbon width adjustment – Datamax DMX E E-4204 User Manual

Page 54

Text mode
Original mode

E-Class

If the printing is light on
the right side of a label,
make a counterclockwise
adjustment with the
Thumbwheel.

Direction

of Media

Movement

;

Note:

If the media begins tracking too far to the right while printing, the

Thumbwheel should be adjusted to the clockwise.

5.3 Ribbon Width Adjustment

The adjustable ribbon handler feature, found on printers equipped with
the thermal transfer option, allows the optimum amount tension to be
supplied by the ribbon supply hub. Adjust the ribbon tension as follows:

1. Turn ‘off’ the printer.

2. Hold the Hub and then rotate the Ribbon Tension Adjustment Knob

to meet your media/ribbon width based on the table below. Ensure
that the Ribbon Tension Adjustment Knob is turned fully to the
clockwise or counterclockwise position. (The knob will no longer
turn once it is in the proper position; do not force this knob.)