Datamax DMX E E-4204 - Manual (Page 19)

E-Class 9
3.2 Adjusting the Media Sensor
The printer is available with a Fixed-Position Media Sensor or an
Adjustable Media Sensor. To identify the type of sensor in your printer,
proceed as follows:
1. Open the cover.
2. Push down the Printhead Latch and raise the Printhead Carrier
Assembly.
The Fixed-Position Media Sensor, shown below, is immoveable. If your
printer has this sensor, proceed to ‘Loading Media’ (Section 3.3).
Fixed-Position Media Sensor
Printhead
Carrier Assembly
Printhead Latch
The Adjustable Media Sensor (AMS), shown below, may need to be
positioned as described below:
Adjustable Media Sensor
Printhead Latch
Printhead
Carrier Assembly