Step 18, Parts needed for roof trim, Roof trim – Arrow Storage Products CM1014 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 18
Parts Needed For
Roof Trim
i 6893 Left Side Roof Trim (2)
>
6015 Side Roof Trim (2)
i 6892 Right Side Roof Trim (2)
1 Attach the right, left and side roof
trim pieces to the lower end of the
roof panels on each side of the build
ing using screws at each panel over
lap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2
Using your thumb and index fin
ger, overbend the bottom flange of
the roof panel rib at the corner
inward enough so the right and left
roof trim caps fit onto right and left
corners.
3
Fasten the roof trim caps to the
31
This manual is related to the following products: