Parts needed for, Step 8, Top frames – Arrow Storage Products CM1014 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step 8
Parts Needed For
Top Frames
Door Track Assembly (1)
Rear Wall Angle Assembly (1)
Side Wall Angle Assembly (2)
The top frame pieces give rigidity to
the walls and provide a surface for
attaching the gables which support
the roof.
1 Fasten the rear wall angle across
the inside top of the rear wall using
screws.
2
Fasten the side wall angles across
the inside top of the side panels us
ing screws. Side wall angles must
21
This manual is related to the following products: