Anritsu MP1777A - Manual (Page 30)

3.1 Listener Input Program Message Format
The WKIlTe and RTAD coniniands take tlic foilo\vin>t fonnals.
WRITE @
Outputs data to the device.
i
■a r u m i a L
WRITE @
Data-
Device number : Data
Arithmetic expression
Character string expression
The same as the example given on the previous page.
WRITE @03 : SENS ; TEL : RANG UI4 ; : SENS : TEL ; BRAT M9953"
i
Listener address
(in case that the GPIB address of the 10 GHz Jitter Analyzer is set at 3)
READ @
Substitutes the data input from the device to the variable.
K Format-------------------------------------------------------------
READ @Device number : Variable
Substitutes the data input from the device (input tangential line setting)
to the variable, A$.
WRITE @03 SENS : TEL : RANG')'" <- Inquires about the input
READ @03 : A$ tangential line setting,
i
Listener address
(in case that the GPIB address of the 10 GHz Jitter Analyzer is set at 3)
3-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com