SINGER W614 - Manual (Page 57)

CHANGliJG “V”
I
'•f
®
Fig. 1 02 Fig. 1 03
Foliowing are
t h e instructions for adjusting and changing the “V” belt:
( 1 ) Remove three screws holding rear cover(Fig.102) by tipping it out at the bottom
and pivoting
around the hand wheel away from the front of the machine.
(2)
To
adjust “V” belt, loosen screws (A, Fig,103) and move bracket B up to loosen
b a i t a n d d o w n t o t i g h t e n . ~
( 3 ) To ' e m o v a “ V ” belt:
i A ) F i a m o v e top cover. ______________ ,
(B ) Loosen clutch (C, Fig.102)
(C)
Loosen screws “A”
{
Fig.1 03) and move bracket “B” to its highest position.
(O) S l i p belt off motor pulley and then over hand wheel.
(E) Replace “V” belt by slipping it over hand wheel and then over motor
{F) Adjust as noted under No. 2.