SINGER W614 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1 7

ft^MOVING THE WORK

, urs ‘O 7+00 the machine when the thread take-up lever and needle bar are at the

highest position. Now raise the presser foot and draw the fabric back and to the left,

rig 21-A and B, r.i.u pass the threads over the thread cutter. Pull down slightly, holding

thread in both hands, so as not to bend the needle. Leave the ends of thread under the

presser foot.

fig. 21 -A

Fig. 21-B