SINGER W614 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
yppER THREADING
1.
Turn the hand wheel toward you to raise the
take-up lever to its highest position.
2. Place a spool of thread on the spool pin.
3.
Lead the thread through the upper arm thread
guides.
4 . Down and between tension discs from right to
Left.
5
.
Draw the thread up through the check spring
and with a slight tug into the hook, See insert,
Fig.
6 )
6
.
Then up through the eye of the take-up lever
from right to left.
7
.
Lead thread down, through the thread guide 19
and
face
plate
guides
then through the needle
bar guide.
8 Thread needle FROM front to back, drawing it
through about
3 or 4 inches. Hold the end of
the upper thread loosely and turn the hand wheel
toward
you
until
the
needle goes all the way
down and comes back up. A loop
be
formed
over
the
upper
thread
which
then
can
be
pulled
out
straight.
Place
both
thread
ends
under
the
presser
foot
and
draw
toward
the
back
of
the
machine,
leaving
both
threads
three or four inches long.
Fig. 7