Juaaudii the stop and mumber 5 – SINGER W614 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SAMPLES OF CREATIVE EMBROIDERY
(Fig.
z b
3 9V/ 9 fgw stitches at 5 width than allow knob to spring back to O for a short
-jcjc.
if necessary, to establish a rhythm.
"B" Set zigzag width control at the second line then move the control slowly back and
juaaudii the Stop and Mumber 5.
"C” Set zigzag width at the first line. Gradually move the control from the Stop to 5
uiiowijig i( io snap back quickly.
"D” Set zigzag width at 5, stitch length at 2. Sew a few zigzag stitches. Drop feed (F,
;jf 3 or 4- stitches then raise it again. By operating the drop feed knob
rhythmically it is not necessary to count stitches.
By changing the needle position and varying the movement of the controls, hun
dreds of designs can be produced.
"E” Set drop feed knob at Down position and lock zigzag width control at the number
5 oosition. Take 3 or 4 stitches, leave needle in fabric and pivot fabric on needle
;o
.naiic
fidXi
daisy
petal.
Continue
until
flower
design
is
completed.
Lock
threads
by astting stllch width at O and sewing 3 or 4 stitches in center of design.