SINGER W614 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
: ^ V ■
V;
«Tiding,
in order to move the fabric freely in any di-
raciioii iu7
mending, «-elease che pressure cap a com
pletely by pressing down on the snap lock, (A, Fig. 20).
V,,rr, ‘ha :'nob to "OOWM” position, which drops the feed well
belov/ the needle plate. To return feed to normal, return knob to
"HIGH”
!G TO SE1
Have take-up lever at highest point before starting to sew. Do not
^
try to help the feeding by pulling the material as this may deflect
the needle and cause it to break.
p-ig_ 20
never
run machine without material under the presser foot.
Place material and threads in position under the presser foot and
inw»r ‘he oresssr foot.
, :., ,d -«tee! loward you until thu needle is ut te higltest point, .'ou are no w
ruadv to uPSin sowing. By tiavlng the needle at its highest point, it is not neoessaty to
touoh the hand wheel to star, the machine. You merely press the control. The speed o,
the machine is regulated by increasing or deoreasig the amount o( pressure exerted on
con