SINGER 201K - Manual (Page 9)

Raise presser foot G by means of presser bar
lifter J to prevent injury to the foot G and
feed H.
Place a piece of material under presser foot
and let the foot down upon it. Turn on
electric current and, if the combination knee
and foot controller is installed as a knee con­
troller, press knee lever to the right. If
controller is placed on the floor to be used as
a foot controller, press down oh pedal of
controller. The speed of the machine is
controlled entirely by the amount of pressure
applied to the controller. Operate machine
in this way, without being threaded, until
you have become accustomed to guiding the
material and operating the controller.
IF MACHINE IS ELECTRICALLY
OPERATED
Fig, 5, Front view of machine.