SINGER 201K User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TO START SEWING

See Fig. 19.

Be sure to have thread take-up lever 5, Fig. 10 in

its highest position.

The throat plate has guide lines for seam width gauged

from centre of needle hole, and cross lines for gauging

square corners.

Pla ce material beneath the presser foot G, turn the

hand wheel to bring the point of the needle into the

material, then lower the presser foot by means of
presser bar lifter J, and start to sew.
Some materials, such as soft finished sheers, nylons,

jerseys, tricots and other elastic and spongy textiles,

require a slight amount of assistance in feeding during

sewing operations.

However, too much pull will stretch the seam, create

irregular stitching and bend the needle. Most

materials require only guiding for best sewing results,

Fig. 19. To Start Sewing.

I*'"'

1^: "