SINGER 201K - Manual (Page 56)

Adjust lug A to position tlie stitcMng
close to the edge of this baud.
Place the second band (lace) into slot 4.
Adjust pressure to correct degree of
lightness for even feeding.
Use a short stitch length and balanced
tensions.
Hold both band edges against the ends
of the slots while stitching.
54
French Seams
The edge stitcher makes very fine
French seams, so well adapted to sheer
fabrics where raw seam edges must be
concealed.
• Trim away seam allowances to
• Lay seam edges together, right sides of
fabric outward, and insert into slot 1.
0 Move lug A to the left to position stitch­
ing Y q " from the edge.
0 Stitch and press,
0 Fold with right sides of fabric together
and insert into slot 1,
• Move lug A to extreme left, allowing
just enough margin to conceal raw
edges.
• Stitch,
Tucking
Dainty tucks from “pin” width to Y^"
may be produced with the edge stitcher.
Tucks are usually made on the lengthwise
grain of the fabric.
O Draw a single thread from the fabric,
or measure from the selvage to locate
the first tuck on the straight grain of
the fabric.