Principal parts – SINGER 7050 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Principal Parts
1. Hand Wheel provides a means for
raising or lowering the needle.
2. Pattern Display shows a variety of
patterns available for your sewing
needs. Pattern ' indicator appears
under the pattern you select by
turning Pattern Selector Dial, #24.
3. Built-In Accessory Storage, under
top cover of machine, provides a
neat and convenient area to keep
accessories.
15. Thread Cutter
16. Slide Plate, with window to see bob
bin thread supply, opens for easy
removal and replacement of bobbin,
it also activates the bobbin winder
17. Bobbin Winder is built into machine
' and aliows you to switch from
sewing to bobbin winding without
removing bobbin.
4. Spool Pin and Cap hold the top
thread supply and allow it to unwind
smoothly as the spool does not turn.
5. Stitch Width Lever controls the width
Of patterns and sets the needle for
straight stitching.
e. Thread Guide helps to insure a
smooth flow of thread from the spool
to the tension.
7. Thread Tension Lever controls top
thread tension.
8. Face Plate is a removable cover
protecting movable parts and sew
ing light.
9. Sewing Light illuminates sewing
area.
10. Buttonhole Lever activates the one-
step buttonholer.
11. Needle Clamp holds needle in
machine and prevents incorrect
insertion.
12. Needle Plate supports the fabric
during sewing.
13. Removable Extension Table lets you
change the machine bed from flat to
free arm.
14. Presser Foot Lifter, at the back of
machine, lets you raise and lower
presser foot.
18. Presser Foot holds fabric against the
feed system and snaps on and off.
19. Screen Contrast
20. Stitch information Button
21. Stitch Length Lever allows for a
variety of stitch lengths.
22. Power and Light Switch turns on
the machine and sewing light at the
same time.
23. Reverse Lever provides either
momentary or continuous reverse
fabric movement.
24. Pattern Selector Dial lets you move
the pattern indicator to any of the
patterns, plus buttonhole, shown on
the pattern display panel.
25. Balance Control adjusts appearance
of Special Stitch patterns and
buttonholes.
26. Electricai Power Cord connects
machine to your electrical outlet.
27. Speed Controller, designed for safety
and convenience, regulates the
electronic solid state speed con
trol.