Section 3 straight stitching, Adjusting stitch length, I j l – SINGER 7050 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 3

STRAIGHT STITCHING

The Straight Stitch Needle Plate (C) and Presser Foot (D) help prevent skipped stitches

and control fabric when straight stitching around a curve or close to the fabric edge.

CAUTION: Straight Stitch Needle Plate and

Presser Foot should be used for straight

stitch sewing only.

Always change back to the appropriate

needle plate and presser foot when not

straight stitching.

M i l

i l l !

' I J L

■ " 1111111111 ll 1 I

ifflirillll ......... — ' 11 ,.

RECOMMENDED SETTINGS

Stitch Selection:

Straight Stitch

Stitch Width:

D ii

Stitch Length:

1 1/2 to 4

Foot:

Straight Stitch (D)

Needle Plate:

Straight Stitch (C)

ADJUSTING STITCH LENGTH

The stitch length indicator is numbered 0 -
4. The lower numbers are shorter stitches.
Shorter stitches are best for light-weight
fabrics; longer ones for heavy fabrics. To
adjust the length of your stitches, slide the
stitch length lever to the left or right.

This manual is related to the following products:

9143