Keeping seams straight, Using the seam guide (n), Turning square corners – SINGER 7050 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KEEPING SEAMS STRAIGHT
To keep seams straight, use one of the
guidelines on the needle plate. The most
commonly used line (1) is extended onto
the slide plate. The crosslines (2) serve
as guides when stitching square corners.
USING THE SEAM GUIDE (N)
For extra help in keeping seams straight,
particularly for very narrow or very wide
seams, use the seam guide which comes
with your machine.
To attach the seam guide, place screw of
seam guide into the hole in the bed of the
machine, on the right side of slide plate
(
1
)
Line up the straight edge of the guide
with the needle plate guideline for desired
seam width and tighten .screw.
TURNING SQUARE CORNERS
To turn a square corner, use crosslines
on slide plate.
• Line up fabric with extended guidelines
on needle plate and stitch seam, slow
ing speed as you approach corner.
When bottom edge of fabric reaches
cornering crosslines (2) on slide plate,
stop stitching.
Be sure needle is down in fabric.
Raise presser foot slightly. Turn fabric,
bringing bottom edge in line with guide
line (1).
Continue stitching seam.
23