Zig-zag blindstitch, Blindstitch hemming, Zig-zag stitch – SINGER 7050 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ZIG-ZAG BLINDSTITCH
Use this Blindstitch when sewing hems and seams, or attaching lace and elastic.
BLINDSTITCH HEMMING
• Practice first on a scrap of material,
carefully following each step.
RECOMMENDED
SETTINGS
Stitch Selection:
Zig-Zag Blindstitch
Stitch Width:
0 if
Stitch Length:
2 to 4
Foot:
Adjustable
Blindstitch (K)
Needle Plate:
General Purpose (A)
• With garment inside out, mark, fold
and press hemline (1).
• Turn hem (1) back against inside of
garment, leaving Vs" of hem beyond fold
(2), as shown.
• Pin or baste all layers in place.
• Raise presser foot.
• Place folded edge (2) directly under
presser foot.
• Be sure bulk of garment is to the left of
needle.
• Lower presser foot.
• Begin sewing slowly, making sure the
wide zig-zag stitch enters only the very
edge of the fold area (2). The narrow
zig-zag should fall in the hem area. If
this is not happening, adjust the position
of the foot.
• Remove pins as you come to them.
2
£