Zig-zag stitch – SINGER 7050 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ZIG-ZAG STITCH
The Zig-Zag Stitch can be used when sewing seams, appiiqueing, monogramming or
decorating.
SEAM FINISHING
Use a zig-zag stitch to finish seam edges
of fabrics that are iikeiy to unrayei.
• Sew seams as desired; trim and press
open.
RECOMMENDED SETTINGS
Stitch Selection:
Zig-Zag Stitch
Stitch Width:
y li
Stitch Length:
1 to 4
Foot:
General Purpose
(B)
Needle Plate:
General Purpose
(A)
• Piace edge of seam aiiowance under
foot, as shown.
• Stitch ciose to edge, letting outer zig
zag fall
over
edge.
SATIN STITCHING
Satin stitching is a series of closely
spaced zig-zag stitches. Satin stitch
monograms, embroidery and appliques for
a smooth, satin-like finish.
• Practice to get desired stitch appear
ance.
Block Monogramming
•
Lightly trace letters on right side of
fabric.
RECOMMENDED SETTINGS
Stitch Selection:
Zig-Zag Stitch
Stitch Width:
0 11
Stitch Length:
1
or
lower
Foot:
Special Purpose (J)
Needle Plate:
General Purpose
(A)
• Center tracing under needle.
• Stitch entire outline, leaving needle in
fabric when turning.
• Pull threads to wrong side of fabric; tie
and trim.
28