Winding a bobbin – SINGER 7050 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WINDING A BOBBIN
The wind-in-place bobbin winds quickly and easily while it’s in the machine.
• Raise needle to highest position by
turning hand wheel toward you.
• Raise presser foot.
• Open slide plate.
• Turn pattern selector dial (1) to select
Straight Stitch/Bobbin Winding, (Details
on “Selecting a Pattern’’ are on page 19.)
• Put an empty bobbin, with black rings
(3) facing up, into bobbin case (4).
• Close slide plate until it stops against
button (6). This will automatically
engage bobbin winder.
15
This manual is related to the following products: