2. capabilities to assist in saving your time, 3. to see the system version, 1) to clear the currently displayed number – Tascam DA-38 User Manual
Page 34: 2) to speed up the keying in of numbers, 1) to display the syscon rom version, 2) to display the servo microcomputer, To see the system version, C ” r _ / n n j,u t r. u u
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 9 : MONITOR AND OTHER CAPABILITIES
9-2. Capabilities to Assist In Saving Your Time
9-3. To See the System Version
When entering the following numbers by using the
A
and the ▼ keys, you can promptly clear the currently
displayed number or speed up the scrolling of numbers.
• Punch in and out points (p.4 • 6)
• Punch in preroll time (p.4 • 8)
• Pitch change (p.5 • 2)
• Locating points (p.5 • 3)
• Track delay time (p.5 • 5)
• Autolocation preroll time (p.6 • 1)
• Offset (p.7 • 3)
(1) To Clear the Currently Displayed Number
Hold either the
A
or the ▼ key and press the other. The
numeric display will be cleared to zero or to a factory
preset.
(2) To Speed Up the Keying In of Numbers
Hold either the
A
or the ▼ key and press SHIFT. The
numbers will scroll faster. Releasing the SHIFT key slows
the scrolling down to normal speed.
You can have the display show the system version number
of your DA-38.
(1) To Display the SYSCON ROM Version
■f
Hold STOP, PLAY, and RECORD and press POWER
on.
The SYSCON ROM version will show on the display.
- c
/ n n
u t
r.
u u
(2) To Display the SERVO Microcomputer
Y Hold REW, F FWD, and STOP and press POWER
on.
The SERVO microcomputer version will show on the
display.
C ”
r
_
/ n n
J,U t
r.
u u
9*3