1 n p o 1 n h, Nu u t.p o 1 n t – Tascam DA-38 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 4: RECORDING
4 6
3 5
7
• When no period in any column is blinking, the
hours, minutes, seconds and frame number change
all at once as you press the A or the ▼ key,
• To clear the display to
" u u D u u D u u " ,
hold the
T
or the
A
key and press the other.
• You can enter any time from zero up to 23 hours,
59 minutes, 59 seconds, 33 frames.
8
B 8
8 8
B 8
^ Press MEMO 1 and the display will momentarily read
like this before indicating the current punch in point.
H
M
S
F
1 n p O 1 n h
^ You'll notice that a period is blinking in the hours
column to show that you can key in the desired
number of hours using the
A
and
T
keys.
• Each time you press MEMO 1, the blinking period
moves to the next column (H, M, S, then F).
• When no period in any column is blinking, the
hours, minutes, seconds and frame number change
all at once as you press the
A
or the
T
key.
• To clear the display
t o " u u u u u D u u ' ' ,
hold the
T
or the
A
key and press the other.
• You can enter any time from zero up to 23 hours,
59 minutes, 59 seconds, and 33 frames.
8 8 i <8 8
8 8
8 8
^ Make sure that the entered punch in point is correct,
then press MEMO 2 and the display will momentarily
read like this before indicating the current punch out
point.
7 To exit the punch in/out point setting mode, press
SHIFT The display will be switched back to show the
ABS time.
To audition the entered points:
• Pressing the LOG 1 key autolocates the tape to a
point 5 seconds (or user selected time) lower than
the entered punch in point, then press PLAY,
♦ Pressing the LOG 2 key autolocates the tape to a
point 5 seconds (or user selected time) lower than
the entered punch out point, then press PLAY.
Pre Point In Point
L
og
f Preroll
Time
Out Point
L
og
2 Preroll
Time
Speaking of remembering :
The double function keys in the center of the unit
offer the upper black-labelled functions when the
SHIFT LED is turned off.
When the SHIFT LED is blinking, they offer the
lower blue-labelled functions.
n
u u t.p O 1 n t
^ You'll notice that a period is blinking in the hours
column, so enter the desired hours using the
A
and
T
keys.
•
• Each time you press MEMO 2, the blinking period
moves to the next column (H, M, S, then F),
4 • 6