Tascam DA-38 - Manual (Page 25)

SECTION 5: PLAYBACK
5-6. Delaying Tracks
The track delay function corrects the time discrepancies
between each track or may be used for other effects.
Adjustable range is from -200 samples (*) to 7200
samples, in 1 sample steps, or from -4 ms to 150 ms, in 1
ms steps, as selected.
(*) 1 sample corresponds to 22,7 ps at a 44.1 kHz
sampling rate or 20.8 ps at a 48 kHz sampling rate.
Y Press SHIFT and the associated LED will start blink­
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
^ Enter the desired delay value by means of the ▲ and
T keys.
The display is cleared if you hold either the A or
the T key and press the other.
• Each time you press DELAY, the unit changes
between "sample" and "ms".
You can enter a 4-digit sample number or a 3-digit
ms number,
• If you press and hold DELAY, the display will
change to look like this and you can enter one and
the same delay time for all the tracks at once.
Q '
t n n n n
n L L
u u u u
The DELAY indicator will light solidly on the display
to remind you that a track or tracks are already
programed to delay.
5 Press SHIFT.
The associated LED will turn off and the display will
be switched back to show the ABS time.
2 Press DELAY and the display will show the track
whose timing you have corrected after any other
tracks and the delay value you have entered for that
track, like this.
t r.
/ n n 1 n n
1 u u \u u
0 Select the track you want to delay by pressing its
REC FUNCTION switch.
5*5