Tascam DA-38 - Manual (Page 19)

SECTION 4: RECORDING
(4) To Switch Off the Track Copy Mode (5) Track Copy Settings Backed Up
4 1
•f Press SHIFT and the associated LED will start blink­
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
2 Press the TRK COPY key and the display will show
the last track copy setting ("t r.c P.S > I " for exam­
ple).
Depending on the last setting, the display will read
"t r.c P. on" at this stage. If this is the case, skip to
step 4.
^ Press the TRK COPY key once more and the display
will read "t r.c P on".
Your settings for track copy are automatically saved to a
backup memory and are not erased when turning off
power: they become the default.
Also, if you press and hold the TRK COPY key (for 1
second or more), the display will show the current track
copy settings as follows :
Display Setting for
• The tens of hours column Track 1
• The units of hours column Track 2
• The tens of minutes column Track 3
• The units of minutes column Track 4
• The tens of seconds column Track 5
• The units of seconds column Track 6
• The tens of frames column Track 7
• The units of frames column Track 8
A solidly lit period in any columns indicates a track of the
DA-38, and an extinguished period indicates an input.
For example:
/ I
I I,
3H BE HB
In this case, track 1 is selected by the user as the source of
track 2, and input 6 as the source of track 5, the remaining
tracks being left alone.
^ Press either the A or the T key to change the " o n '
display to "of F".
t r. c P. o FF
4 - 1 3