3) how to record the sine wave tone on tape, 8‘3. initializing the backup memory, 3, initializing the backup memory – Tascam DA-38 User Manual

Page 30: I n t, E r d, D o \ n e

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 8 : CONTROLLING THE OA-38 FROM MENUS

(3) How to Record the Sine Wave Tone on Tape

• The built-in oscillator must be switched on at the

Y Press the REC FUNCTION switch of the track you

want to record on. The associated LED will start

blinking.

2 To begin recording the sine wave tone from the oscil

lator, hold RECORD and press PLAY. The RECORD

button will light solidly, and also the REC FUNC

TION LED that was blinking.

^ To stop recording, press STOP.

* To switch the built-in oscillator off, press either the A

or the ▼ key to change the "on" display to "of F" at

the "uSr" menu.

8‘3. Initializing the Backup Memory

Follow these steps to initialize or reset the backup

memory.

Y Press SHIFT and the associated LED will start blink

ing to show that all the double function keys are

switched to offer their lower blue-labelled functions.

□

2 Press MENU as many times as necessary to change

the display to look like this:

I n t.

Press either the

or the

key and the display will

change to look like this:

E R d

Press either the

or the

key once more. The

initialization process will start, and when it is

complete, the display will change to look like this:

d o \ n E

Press SHIFT and the associated LED will turn off, the

display being switched back to show the ABS time.

8*3