1) copying in stereo pairs, Hr. cp, T r. cp. o n – Tascam DA-38 User Manual
Page 16: T r. cp, Lr. cp, R. p. 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 4: RECORDING
(1)
Copying in Stereo Pairs
As an example, let's copy tracks 3 and 4 to tracks 5 and 6
in stereo.
9
1 8
4 6
Q
Now, let's proceed with source track selection.
Each time you press the
A
key, the rightmost display
will change in sequence, like this (" i" for input, and
"t" for track):
, 5 — - S -
The
T
key generates them in reverse order.
Since track 3 is one of the source tracks in our exam
ple, have the display show
"t 3",
like this :
hr. cP.
S
Y Press SHIFT and the associated LED will start blink
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
2 Press the TRK COPY key and the display will read
"irr.cP.
o f f " .
2 Press the
A
or
T
and the "t
r . c P . o f f "
will change
to
" t r . c P .
on" to show that the track copy function is
activated, the TRK COPY LED being lit.
t r. cP. o n
• If you hold the
A
or the
T
key and press the
other, the display is switched back to show the
default source selection (" < 5 " in our example).
0 In a similar way, let's specify another target/source
pair.
To specify track 6 as a target track, press the track's
REC FUNCTION switch, and the associated LED
will start blinking while the display will change to
look like this:
t r. cP.
5
.5
Target Track
7 Specify track 4 as a source track by means of the
and
T
keys.
^ You have to specify target tracks before source tracks.
So press the REC FUNCTION switch of track 5 (one
of the target tracks in our example). The track's LED
will start blinking and the display will change to look
like this:
Lr. cP.
s
.5
Target Track
r.
P. 5
Source
0 To exit the track copy setting mode, press SHIFT. The
display will be switched back to show the ABS time.
The TRK COPY LED remains lit.
0 To start copying, hold RECORD and press PLAY.
Track 3 is copied to track 5, and track 4 to track 6.
• If you are using two DA-3 8 s, you can copy tracks
of one unit to tracks of another (discussed below)
while at the same time you can copy tracks within
one unit (as discussed above).
4 * 1 0