4. selecting a tdif input bit length, Selecting a tdif input bit length, T d\ if – Tascam DA-38 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 8 : CONTROLLING THE DA-38 FROM MENUS
8-4. Selecting a TDIF Input Bit Length
To send and receive digital data through the TDIF-1 TO
port on the rear panel of the unit, you have to select a bit
length in accordance to the one of an incoming digital
data.
The DA-38 offers three options : 16, 20, and 24. Factory
preset is 16.
Follow these steps to select a bit length.
Y Press SHIFT and the associated LED will start blink
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
2 Press MENU as many times as necessary to access a
TDIF menu, which looks like this:
t d\ iF
15
^
By using the ▲ and
T
keys, have the display show
the necessary bit length.
• Select ”i?
H
" when the unit is connected to another
DA- 38, or
• Select"
1 5 ”
when connected to the DA-88.
^
Press SHIFT and the associated LED will turn off, the
display being switched back to show the ABS time.
8*4