Tascam DA-38 - Manual (Page 14)

SECTION 4: RECORDING
4-4. Crossfade Time Setting
Seamless punch in and out of record is ensured by a
crossfade action which is factory preset to 10 millisec­
onds. You can change this time up to 90 ms at a menu, in
10 ms steps.
4-5. Preroll Time Setting
The DA-38 is factory preset to offer 5 seconds of preroll
up to punch in points. You can change the time up to 59
minutes 59 seconds, in 1 second steps, if you want to, as
follows:
3 2
Y Press SHIFT and the associated LED will start blink­
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
2 Press MENU to access a crossfade menu, which looks
like this:
CF Rd E
I n
I U
^ Enter the desired time using the A and T keys,
^ To exit the menu mode, press SHIFT. The display will
be switched back to show the ABS time.
Pre Point In Point
Preroll Time
1 5
" f Press SHIFT and the associated LED will start blink­
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
2 Press PRE ROLL, The time now appearing on the
display is an autolocation preroll time and not for
punch-in. (Autolocation preroll time is explained in
Section 6)
^ Press PRE ROLL once more and the display will now
show the current punch-in preroll time, like this :
Pr. n n u u |u D,r h
^ Enter the desired preroll time using the A and T
keys.
If you hold the T key and press the A
key, the display is cleared to the factory preset
CPr.asns.rh'').
^ Press SHIFT to exit the preroll time setting mode and
switch the display back to show the ABS time,
4*8