Using test local mode, Using resume normal mode – Nortel Networks NN43110-101 User Manual

Page 89

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Additional phone features

Local Mode

If the WAN connection fails, the IP Phone loses communication with the

Main Office Telephone Preference Service (TPS). It then registers with

the MG 1000B and receives telephone services from the MG 1000B.

When in Local Mode, the telephone displays the message LOCAL

MODE.

This section provides more information on the following topics:

•

Using Test Local Mode

Use Test Local Mode to check Local Mode functionality (make and
receive telephone calls). Test Local Mode is useful when provisioning has

changed for an IP Phone on an MG 1000B Controller.

1. Press the Services key.

(Services)

2. Press the Up/Down navigation keys to

scroll and highlight Test Local Mode.

3. Press the Enter key (the telephone

resets and registers back to the Main

Office).

Using Resume Normal Mode

Use the Resume Normal Mode command to return to Normal Mode after

testing survival functionality.